EcuTek ECU Connect Bluetooth Interface

The EcuTek ECU Connect Kit allows both the tuner and end user to interact with the ECU via their mobile device. This hardware seamlessly integrates with EcuTek’s RaceROM features to provide innovative new functions and even greater control over the factory ECU.

Below is what will be included in your EcuTek ECU Connect Kit:

1 x EcuTek OBD to EVI Bluetooth Communication Device
1 x EVI to USB Interface Cable
1 x Protective Travel Case

Note: This kit does NOT include licensing

This hardware kit is used in conjunction with the ECU Connect mobile application. ECU Connect is a free app for both IOS and Android devices that allows the end user to wirelessly interface with their ECU - no laptop required!

Below is a list of ECU Connect custom features:

Vehicle Info - Read specific vehicle information, such as VIN number and ECU ROM ID.

Dashboard - Personalize your own custom dashboards for data monitoring. Choose from hundreds of available logging parameters and adjust the style and colors of your dashboard to make it your own!

Data Logging - Choose from hundreds of available logging parameters and easily log data with a high logging rate and fantastic resolution. Data logs can be stored on your device and/or sent to your tuner for analysis.

Map Switching - Select from up to three separate mapswitch modes in a single tune! Whether you're changing from pump fuel to ethanol or from performance to valet mode, do so on the fly! No reflash required.

Launch Control - Adjust your launch RPM and allow EcuTek’s proprietary Boost Off The Line strategy to help you build tons of boost on launch! Combine this with EcuTek’s post-launch traction control to ensure the best possible 0-60 time.

Boost Controller - Handing your car to a friend or valet? Seamlessly adjust maximum throttle position to ensure that vehicle acceleration and boost pressure are limited to a desired value regardless of accelerator input.

Custom Inputs - Flex Fuel? Rolling Anti-Lag? Custom compensations and failsafes? Whether you’ve got a street car or a race car, you can’t be caught out without EcuTek’s most powerful custom features! Take full advantage of your factory ECU with these customizable inputs and ask your tuner how you can maximize your vehicle’s potential with these EcuTek-specific setups.

Diagnostic Trouble Code (DTC) Tool - Got a check engine light? Don’t fret! EcuTek’s DTC tool can help diagnose and clear any codes that may be stored in your ECU.

OBD Readiness - Check your emissions compliance before making the drive out to the testing facility! Ensure applicable monitors are ready and better understand what drive cycle(s) may be necessary before your next exam.

Performance Analyzer - Measure your acceleration with EcuTek’s GPS based performance analyzer! Get an accurate idea of where you’re at so you can plan for where you want to be.

ECU Programming Tool - Got a new map from your tuner? Use this tool to program your ECU right from your mobile device! No laptop or cables required. *EcuTek Remote Tuning License required*

ECU Tool - Did your DAM drop? Bummer! Use EcuTek’s ECU tool to reset ECU learning and be on your way in no time. This tool will also reset learned knock, cam phasing, and idle adjustments; this may require the ECU to idle and re-learn after using the tool.

Note: Not all custom features will be available for every vehicle

Note: Will not work in conjunction with any other reflash tuning device that installs a firewall onto the factory ECU - such as a COBB AccessPort